|
The "Stucco Marmorino Breccia/Coral/Golden" is
quite similar to "stucco marmorino":
in fact it's a very particular product especially studied
to obtain the typical aspect of Marmorino, using however a
more nature fine product.
The classical Marmorino has a granulometric of 0,6, while
Stucco Marmorino is sieved with nets of 0,3: therefore applying
this product results easier and also to obtain the smoothness
and brightness desired.
For its nature "Stucco Marmorino" can be considered
one of the best high-quality interior finishing products and
permits to obtain excellent decorative results with a relative
low quantity of product.
The "Stucco Marmorino Breccia/Coral/Golden" differs
from "stucco marmorino" for its colour light beige/pink/golden
yellow and for the micro-sieved grains of sand/pink marble/yellow
marble which gives an aspect similar to a antique or old surface.
According to needs and through samples, the Bericalce
is able to formulate this product with various colour tones
and quantity of grains
| |
Technical
data |
|
|
|
|
|
|
| |
Name: |
|
stucco Marmorino Breccia/Coral/Golden |
|
| |
Colour: |
|
light beige/pink/golden yellow |
|
| |
Technical features: |
|
natural transpiration |
|
| |
Application: |
|
see "Application suggestments"
below |
|
| |
Dilution: |
|
ready to use. |
|
| |
Aspect: |
|
dense mixture |
|
| |
Capacity: |
|
1/1,5 kg/sqm. |
|
| |
PH: |
|
13 |
|
| |
Packaging: |
|
plastic buckets for 25 kg of product |
|
| |
Compatible pigments: |
|
colouring powders, oxides |
|
| |
Composition:
|
|
micro-filtered
magnesium quality slacked lime putty, grinded minerals
and
special products to distinguish the application aspects.
|
|
| |
Application
suggestments |
|
a) The product must be applied
in more coats, using the typical stainless steel spatula
b) To help the fixing of the primer coat, one must
consider the absorption of the surface where the product
is applied, and if necessary to wet it, the stucco marmorino
must be of the right density always in consideration of
the absorption of the surface.
c) We suggest not to press too much the product
during the primer coat, this favours the fixing and creates
major adherence for the other coats.
d) After application, the product will show various
shades, created by the fantasy of the decorator.
e) The product compatible with the complete range
of "Bericalce" products.
f) The finished product can be treated with wax
or soap for a major protection and final brightness. |
|
| |
|
|
Top |
|