|
The consolidating micro acrylic insulator is a primer for
internal and external use, composed of acrylic resin dispersal
in water solution
Due to its very fine particles, 0.003 micron, this special
resin permits a better absorption of the product in the surface.
It's particularly indicated to consolidate friable and dusty
supports, favouring a perfect holding for the succeeding coats
of emulsion paints and wall enamel paints.
Excellent for the application on concrete, plaster, asbestos
cement and old hydro-paintings.
| |
Technical
data |
|
|
|
|
|
|
| |
Name: |
|
Micro consolidating acrylic insulator |
|
| |
Technical features: |
|
Consolidating transpiration primer |
|
| |
Application: |
|
long bristle brush |
|
| |
Approx. Capacity: |
|
10-15 sq.m./kg |
|
| |
Specific weight: |
|
1 kg/lt. |
|
| |
Dry residue: |
|
25% |
|
| |
Medium drying time: |
|
12-24 hours |
|
|
|
|
| |
Water dilution: |
|
1/3 - 1/4 |
|
| |
Application
suggestments |
|
a) Prepare the surfaces:
- control that the old paints are fixed, clean and dry,
removing eventual insubstantial parts
- eliminate traces of oil or fat
- consolidate and plaster any irregular parts of the
surface
b) The Micro consolidating acrylic insulator
must be diluted in water with a proportion 1:3 / 1:4
and carefully mixed:
- apply one or two hands of insulator according to the
absorption, using a long bristle brush (clean the brush
immediately after use)
- for particularly porous supports we suggest to apply
the a more concentrated product .
- protect from rain
- verify if the insulator is completely consolidated
and if it reached its purpose.
c) Proceed then with the application of the paint
after at least 24 hours
d) Do not apply the product at a temperature
lower than +10° and on wet surfaces.
e) Do not apply on metal surfaces.
|
|
| |
|
|
 Top |
|
Italian
Spanish
Technical data 