Production intonachino of lime

 

Production of lime - finishing products based on lime
Via Brenta, 60 - 36100 Vicenza Italia - Tel. e Fax 0444 929102

 
  Italian Spanish
 
       
 

Intonachino

Technical data

The grinded minerals thoroughly mixed to the lime determines the natural value of this product and gives the colour of pastel tones which distinguishes and enhances it in time

The product, based on slacked lime putty, has the maximum transpiration and, once applied and dry, shows light and harmonious shades.

More particular effects can be obtained by working, when still fresh, coloured sponging or limewashing.

Applying "intonachino" directly on rough or fine mortar of 2/3mm thickness guarantees a complete external time-lasting finishing; moreover, due to its strong fixing capacity, it's also eccellent for future interventions of the same or of any other product.

For particular difficult surfaces we suggest the application of the vinyl consolidated insulator of Bericalce.



  Technical data    
  Name:   mineral Intonachino
  Colour:   see colour chart
  Technical features:   natural transpiration
  Application:   see "Application Suggestments" below
  Dilution:   dense paste ready to use
  Capacity:   2,5/3 Kg/mq
  PH:   13
  Packaging:   Plastic bucket for 25kg of product
  Composition:

 

magnesium quality micro-filtered slacked lime putty, grinded minerals and special additives that improve the technical application aspects.

  Application
suggestments:
  a) Use only new sponge cloths when passing the final touch.

b) To finish the applied intonachino, one can use clean water and mix in a small quantity of intonachino of the same colour.

c) The product must be applied two times

d) The primer coat can be applied starting from the top and needs no particular care: it's important to pay attention around the doors and windows and finish carefully the edges.

e) e) Before spreading the second coat, the primer must be well dry (maybe by applying the primer coat the first day and the second coat the second day).

f) Since the second coat is the finishing one, it's important to start from the top, crossing horizontally at about 70cm., continuing this work with strips always on fresh.

g) Working with sponge on dry intonachino can ruin the final aspect.

      Top

 
 
     

 
   
 




 
Homepage | The company | Lime | Grassello lucido | Aged grassello | Grassello puntinato
Venetian plaster | Stucco marmorino | Stucco marmorino breccia | Intonachino | Intonachino grosso |
Intonachino liscio
Basic plaster | Maltafix | Maltamix TM | Maltamix TG | Punto calce | Velo calce | Silossanic covering