Luxury & Lime - Advanced Application Course

Marmorino Floor - Marble Plaster Flooring

Description of productApplication FieldTechnical dataProduct characteristics

Instructions for use Notes

Marmorino Floor - Marble Plaster Flooring

Technical Chart

Technical Chart

Safety Data Sheet

Safety Data Sheet



Marmorino Floor application 
Marmorino Floor

'Surface concrete effect' application 
"Surface concrete effect"


Logo certificazioni Marmorino Floor

Description of product

"Powder Mixture" with selected white marble powders and hydraulic binders to mix with floor resins as smooth finishing.

Application Field

Smooth finishing for floors (Marmorino floor series).

Product characteristics

MARMORINO FLOOR is a smooth finishing with a Venetian Marmorino effect, very resistant and resilient especially studied as walkable finishing. Although it’s a very resistant product, the natural composition makes it excellent for living zones. The colour can be personalized by using the colour scheme of the Tintometric system Luxury&Lime.
The tradition of lime, produced with an advance technology, aims Bericalce towards the Environment Care and Green Division market. The natural raw materials, accurately selected, give MARMORINO FLOOR a very high ecologic value: the dispersion of humidity avoids the growth of moulds and bacteriums, without using chemical additives. Non-flammable and low odour.

Technical data


Marmorino Floor


Lime and Hydraulic binders, marble powders and additives for less than 4%




Natural White


with resin “Floor Hard Mix” 40%

Quantity per layer

approx. 1,8 - 2,2 m2/Kg


13 in water solution

Vapour permeability

SD ~ 0,01 m (DIN 52 615)

Water absorption

w ~ 0,005 Kg / (m2 h0,5) (EN 1062-3:2001)

VOC class

0 g/l, wall paint and subcategory “L” max.value UE2010 30g/l

Specific weight



18 Kg buckets


Keep in dry place with temperture min.5° - 30°C max.


Protect the surfaces from rain in the first 24 - 48 hours from application

Instructions for use

• Prepare the base with a specific Primer, Isolante Acrilico or levelling base like Isolante Ancorante Primer Berico
• Application with stainless steel trowel
• Stir carefully with the special resin and eventual colour until you obtain a homogeneous paste without lumps
• Base must be clean and dry, any unsubstantial parts, traces of oil or grease must be removed; plaster any irregularity of the base
• Application of 2 coats on a base of Intonachino Floor. After spreading, the grade of satin finishing will be refined the stainless steel trowel. Spread first layer and let dry for 60% before applying the final coat, in order to guarantee a correct fixing to the base.
• It’s important that the product be of the correct consistence and dilution according to the temperature and absorption of the surface
• Temperature of application: 5° to 35°C
• All lime-based products have a normal drying time according to the thickness but, the real hardness is obtained through carbonation which occurs on contact with the air.
This process could last many months.


The present technical chart has been written by Bericalce’s experts and the indicated technical and scientific information have been tested in our own workshop.
Any responsability regarding the results are due only to the method and conditions used during application of the product.
These indications are a valid support for testing the quality of the product in each specific case.

Decorative Lime Plaster Finishes Production - Venetian Polished Plaster - Marmorino Carrara - Eco Natural Lime Paint - Where to buy Slaked Lime - Venetian Plaster Contractor - Venetian Plaster Application Training
Marmorino Floor Covering

Via Odorico da Pordenone, 18 - 36100 Vicenza - ITALY
Phone/Fax (+39) 0444 929102 - Phone (+39) 0444 923317
Email: - Skype: bericalce
P.IVA 02584140244

Copyright 2016 Bericalce - All rights reserved

Web site developement by Forma Srl with Minisfera CMS