Luxury & Lime - Advanced Application Course

Marmorino Carrara - Classic "500" 
Venetian Marble Plaster

Description of productApplication FieldTechnical dataProduct characteristics

Instructions for use Notes

Marmorino Carrara Classic 500 - Venetian Marble Plaster

  IconaPDF Technical chart IconaPDF Safety data sheet

Description of product

Classic Marmorino Carrara is a "Grassello Paste" with selected white marble powders (500 microns) for a prestigious satin Venetian Marmorino finishing effect - medium thickness.

Application Field

Prestigious decorations, medium thickness with satin finishing effect for interiors.

Product characteristics

Marmorino Carrara MARMORINO CLASSICO "500" for interior and exterior finishing which permits to obtain, with more layers, the traditional Venetian Marmorino effect. Its accurate mix renders the product soft and easy to apply. The colour shades can be personalized by using the colour scheme of the Tintometric system Luxur&Lime. The tradition of lime, produced with an advance technology, aims Bericalce towards the Environment Care and Green Division market. The natural raw materials, accurately selected, gives to MARMORINO CLASSICO "500" a very high ecologic value: the dispersion of humidity avoids the growth of moulds and bacteriums, without using chemical additives. Non-flammable and low odour.

Technical data


Marmorino Classico "500"


"Dolomitic" Lime Putty (Grassello) minimum 12 month aged
Marble powders, titanium dioxide and additives for less than 4%


Highly dense paste


Natural White


Ready to use (if needed a dilution in water 0-5%)

Quantity per layer

approx. 1,2 - 1,6 m2/Kg



Vapour permeability

SD ~ 0,04 m (DIN 52 615)

Water absorption

w ~ 0,3 Kg / (m2 h0,5) (EN 1062-3:2001)

VOC class

5 g/l, wall paint and subcategory “L” max.value UE2010 30g/l

Specific weight

1,7 Kg/l


7,5 - 25 Kg buckets


Keep in dry place with temperture min.5° - 30°C max.


Protect the surfaces from rain in the first 24 - 48 hours from application

Instructions for use

• Prepare the base with a specific Primer, Isolante Acrilico or levelling base like Isolante Ancorante Primer Berico
• Apply Marmorino Carrara with stainless steel trowel
• Base must be clean and dry, any unsubstantial parts, traces of oil or grease must be removed; plaster any irregularity
of the base
• Application of 2 or more coatings. After spreading, the grade of brightness will be refined with spatola and/or special
clothes. We suggest to apply the second layer after 4 hours to permit the first layer to dry correctly It’s important that the product be of the right consistence and dilution according to the temperature and absorption of the surface. For exteriors the product is guaranteed only if applied on a surface of Intonachino Classico
• Temperature of application: 5° to 35°C
• All lime-based products have a normal drying time according to the thickness but, the real hardness is obtained through carbonation which occurs on contact with the air.
This process could last many months.


The present technical chart has been written by Bericalce’s experts and the indicated technical and scientific information have been tested in our own workshop.
Any responsability regarding the results are due only to the method and conditions used during application of the product.
These indications are a valid support for testing the quality of the product in each specific case.


Decorative Lime Plaster Finishes Production - Venetian Polished Plaster - Marmorino Carrara - Eco Natural Lime Paint - Where to buy Slaked Lime - Venetian Plaster Contractor - Venetian Plaster Application Training
Marmorino Floor Covering

Via Odorico da Pordenone, 18 - 36100 Vicenza - ITALY
Phone/Fax (+39) 0444 929102 - Phone (+39) 0444 923317
Email: - Skype: bericalce
P.IVA 02584140244

Copyright 2016 Bericalce - All rights reserved

Web site developement by Forma Srl with Minisfera CMS